May 2013:
T500 RS : New Driver + New Firmware
|
|
|
|
|
| Downloads |
 |
The Downloads section contains all downloads for your product(s) including Drivers, Utilities, Bios files and User Guides
|
| Drivers / |
|
|
2 Total Record(s) found
|
|
System requirements:
- Windows® XP*/XP 64 bits/ Windows® Vista 32 bits/Vista 64 bits/ Windows® 7
*Service Pack 2 for Windows XP
- DirectX 9.0c
Installation procedure:
1- Remove any previous driver versions.
2- Remove any version of the Thrustmapper programming software.
(As compatibility of Thrustmapper with this new driver is not certified, uninstalling the programming software is recommended).
Once the drivers have been updated, you should not reinstall or uninstall any older driver versions or the Thrustmapper software.
3- Restart your computer.
4- Download the new drivers.
5- Once the download is complete, double-click the installation (.exe) file and follow the instructions provided.
6- Once installation is complete, verify that your accessory is properly recognized in the Control Panel/Game Controllers (or Gaming Options) window with OK status.
Do the same for calibration and buttons in the Test Input tab.
Do the same for the 8 Force Feedback effects in the Test Force Feedback tab.
Note:
* If you have previously carried out a “manual calibration” using the “Thrustmaster Calibration Tool” software, you must carry out a new “manual calibration” (following installation of the new driver) in order to re-enable the calibration.
* Once the drivers have been installed, any other compatible devices will be automatically installed with the appropriate drivers.
Supported Thrustmaster products:
Racing wheels:
“F 430 FFB”
"Rally GT PRO Force Feedback”
“RGT PRO Clutch Edition”
“F1 Force Feedback”
“NASCAR Pro Force Feedback 2”
“Ferrari GT 3-in-1 Rumble Force”
“Ferrari GT 3-in-1 Experience”
“Ferrari GT 2-in-1 Rumble Force”
“Ferrari GT 2-in-1 Force Feedback”
“Ferrari GT Experience 3-in-1 Rumble Force”
“ENZO Force Feedback”
“ENZO 2-in-1 Racing Wheel”
(Note: No Force Feedback on this wheel)
“ENZO Wireless Racing Wheel”
(Note: No Force Feedback on this wheel)
Gamepads:
“Dual Trigger Wireless PC”
“Dual Trigger 2-in-1 Wireless Rechargeable”
“Dual Trigger 2-in-1 Rumble Force”
“Dual Trigger 2-in-1”
(for versions “2.0” or “3.2” only: version number can be found on back of gamepad)
“Firestorm Dual Analog” Version 1, 2, 3, 3.2 and 4
(Note: No Force Feedback on these gamepads + not compatible version « Dual Analog 3 - Usb Controllers VID 07B5 »)
“Firestorm Dual Power” Version 1, 2, 3, 3.2 and 4
“360 Modena Force UPAD”
“T-Mini 2-in-1”
“T-Mini 2-in-1 Rumble Force”
“T-Mini Wireless 2-in-1”
“T-Mini Wireless 2-in-1 Rumble Force”
“T-Wireless 3-in-1” “T-Wireless 3-in-1 Rumble Force”
“Run’N’ Drive 3-in-1”
“Run”N’ Drive 3-in-1 Rumble Force”
“Run’N’ Drive Wireless 3-in-1”
“Run’N’ Drive Wireless 3-in-1 Rumble Force”
Gamepads:
“T.Flight Hotas X
“T.Flight Stick X
“T-16000M”
(Note: No Force Feedback on these joysticks)
Changes and improvements:
For optimal sensations:
* Force Feedback adjustment bar: “Aggressiveness”.
• Decrease the % to decrease the strength of effects.
• Increase the % to increase the strength of effects as well as re-centering on your wheel.
• Decrease or increase the % to modify the vibration strength on your gamepad.
* For “Force Feedback Racing Wheels”
• Use the “Wheel Force Effects” configuration in games.
• In most games: invert forces or apply a negative force coefficient.
* For “Gamepads” or “Vibration Racing Wheels”
• Use the “Gamepad Force Effects” configuration in games.
• In most games: invert forces or apply a negative force coefficient.
Game Controllers (Control Panel):
You can access it via:
“Start/Programs/Thrustmaster FFB Driver/Game Controllers”
The Game Controllers window allows you to:
- test axes and buttons for gamepads and racing wheels.
- configure axes for racing wheels.
- test and configure Force Feedback effects.
|
 [- Windows® XP*/XP 64 bits/ Windows® Vista 32 bits/Vista 64 bits/ Windows® 7] 10.4 MB |
|
? Unified FFB Driver version 10.0.5.
? The Thrustmaster Force Feedback Test Utility allows you to test out Force Feedback effects (Constant, Ramp, Periodic).
You will find it in the following location: Start/Programs/Thrustmaster FFB Driver/Test Force Feedback.
Note: the test will only work if your accessory is recognized as the number 1 or preferred game controller. In order to avoid any confusion, disconnect any other game controllers from your computer.
System requirements
? Windows 98 SE/Me/2000/XP*
*Service Pack 3 is required for Windows 2000
Service Pack 1 is required for Windows XP
? DirectX 9
Supported Thrustmaster Products:
360 Modena Force UPAD
F1 Force feedback racing wheel
ENZO Force Feedback Wheel
Firestorm Dual Power
Firestorm Dual Power 2
Firestorm Dual Power 3
Firestorm Dual Power 3.2
Nascar Pro Force Feedback 2
Top Gun Fox 2 Pro Shock
Wireless Dual Trigger
Changes and improvements
? Compatible with Thrustmapper v4.0x (Only for Thrustmapper supported devices).
Fixed in this version
? Compatible with Windows XP Service Pack 2.
? Application of and improvements to Force Feedback effects in next-generation racing games (e.g.: XPand Rallye).
Installation Procedure
1- Remove any previous driver versions.
2- Download the driver:
? Create a folder for all your Thrustmaster downloads: right-click the Windows desktop, then point to New/Folder.
? Name the folder Thrustmaster Downloads.
? On the Thrustmaster website, proceed to the driver section for your product and click the download link.
? A File Download dialog box appears. Click Save.
? A Save As dialog box appears. Select the Thrustmaster Downloads folder you have created and then click Save.
3- Once the download is complete, double-click the installation (.exe) file and follow the instructions provided.
Windows 98 SE users may be prompted to insert their installation CD in order to complete the installation.
4- Once installation is complete, verify that your accessory is properly recognized in the Control Panel/Game Controllers (or Gaming Options) window with OK status. Do the same for FFB effects in the Force Feedback Test Utility.
Once the drivers have been installed, any other compatible devices will be automatically installed with the appropriate drivers.
|
|
[Win 98SE, ME, 2000, XP] 1.57 MB |
|
| Advanced Support |
|
| For Access to the advanced support links please login. |
|
|
|
Package 2009_FFD_1
4.FFD.2004 Driver Package